Compatibility:
Fits all 2018-2024 Toyota Camry LE, XLE, SE, XSE, & Aftermarket KH Bumper
This is the only real Carbon Fiber side spat aprons on the market for the Gen 8 Camry. It provides an eye-catching upgrade to your Camry's rear, and complete the diffuser. These aprons are 1 piece each and installed with self provided tape and self tapping screws.
Installation Instructions:
To ensure optimum outcome, test fit before installing. Once you the position and angle you want, use visual or blue tape markers to determine where to drill self tapping screws into the spats and the bumper. You should also add tape to the parts that connect to the bumper. The spats so have pre cut holes that should line up with your Camry's clips, but we cannot guarantee the original clips will hold, so we do recommend tape and self tap screws. It is recommended to put tape on the actual car bumper where the spats will connect to, since the tape would struggle to stick to the car not the diffuser in most cases. Clean both the spats and the car bottom bumper area well with alcohol and let dry. Before exposing the double sided tape, do another mock install to figure out the best way to install. Once the tape is exposed and sticks, it will be difficult to readjust. Heat up the tape to activate the tape. When exposing the tape, do so gradually to ensure you keep the diffuser in the correct position and angle while the tape is being exposed. Press down on the exposed tape areas and hold for 1 minute. You can also use self tapping screws for the parts that sit under the car. Do not allow to sit in the sun, or any contact with water for 24 hours.
Shipping:
In stock, 2-7 day shipping.