Carbon Fiber Rear Bumper Diffuser Compatible for 2018-2024 Toyota Camry SE & XSE
Compatibility: Toyota Camry 2018-2024 SE & XSE only, does not fit TRD, XLE or LE
Description:
This is the only real Carbon Fiber diffuser on the market for the Gen 8 Camry. It provides an eye-catching upgrade to your Camry's rear, with the carbon shine and the third brake light. We will include a pre-cut tint that you can chose to put over the red lens. This diffuser is 1 piece and installed with self provided tape and self tapping screws.
Installation Instructions:
To ensure optimum outcome, test fit before installing. It is best to have someone help you hold the diffuser into it's place in order correct position and angle all around. Once you have it in place, use visual or blue tape markers to determine where to drill self tapping screws into the lip and the bumper. Also take note of where it should line up with the car, and how high it should sit. It is recommended to put tape on the actual car up to where the top of the diffuser would be, as the tape would struggle to stick to the car not the diffuser in most cases. Clean both the back of the diffuser and the car diffuser area well with alcohol and let dry. Apply tape the diffuser sides and tape to the car diffuser top area. Before exposing the double sided tape, do another mock install to figure out the best way to install. Once the tape is exposed and sticks, it will be difficult to readjust. Heat up the tape to activate the tape. When exposing the tape, do so gradually to ensure you keep the diffuser in the correct position and angle while the tape is being exposed. Press down on the exposed tape areas and hold for 1 minute. You can also use self tapping screws for the parts that sit under the car. Do not allow to sit in the sun, or any contact with water for 24 hours.
Shipping:
In stock, 2-7 day shipping.